Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Tomography Powered 3-phase Flow Metering In The Wet Gas Regime
Author: ystein Lund B, Arnstein Wee And Ingve Morten Skjldal,
Source: 2009 South East Asia Flow Measurement Conference
Year Published: 2009
Abstract: Multiphase meters were initially developed by several companies during the 1990 s and operating companies have gained about 10 - 15 years of operational experience by using them. The need for high performance meters has been expressed by the oil companies since quite many years back 1. The particular case where the gas fraction of a multiphase stream is in the high 90 percent level (typically above 95% gas) is denoted wet gas. As a matter of fact, the majority of gas producing wells contain small amounts of liquids and wet gas metering represents a growing interest for the gas field operators. Even in cases where the reservoir only produces gases, liquid condensation will usually occur in the flow lines because of the reduction in temperature and pressure causing wet gas conditions at the metering location.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.