Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Wet Gas Test Comparative Results: Orifice Vs. Usm
Author: John Lansing Toralf Dietz Dr. Richard Steven Jim Bowen
Source: 2014 Appalachian Gas Measurement Short Course
Year Published: 2014
Abstract: The CEESI Nunn Wet Gas facility consists of a closed- loop test stand with up to 650 horsepower that permits flow rates from about 83 to 620 ACMH. This corresponds to 3 to 23 m/s in 4-inch Schedule 80 piping. Pressures can range from 1,380 kPa up to 7,500 kPa (13.8 Bar - 75 Bar). Gas flow is measured using a calibrated 6-inch turbine meter, and the injected liquid is measured using one of 2 different Coriolis meters (1/2 and 2 sizes). The liquid typically used is Exxsol D80, but water, or a mixture of both can also be used

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.