Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Orifice Meter Run Fabrication - A Demonstration
Author: E. A. Bartolina
Source: 1956 Southwestern Gas Measurement Short Course (Now called ISHM)
Year Published: 1956
Abstract: The design and fabrication of Orifice Meter Runs is covered in complete detail by the American Gas Association Committee Report No. 3, published in April, 1955. This report can be secured from the American Gas Association, 420 Lexington Ave., N. Y. 17, N. Y., al a nominal cost. Committee Report No, 3 is intended to supplement Report No. 2. Generally, all the data in this report is the same as included in Report No. 2, except that it has been expanded to cover a wider range of conditions. In many instances, slight changes were made and statements added in order to clarify some of the conditions which were brought about from practical application of Reports Nos. 1 and 2. The orifice factors have been established for a pressure base of 14.73 psia in place of the former pressure base of 14.4 psia. The base pressure factor table contained in this report enables the determination of the volume of gas flow to be made in terms of any contract pressure base. The results are consistent with those obtained from Report No. 2.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.