Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: The Finding Of The Committee For The Study Of The Practical Methods
Author: R. m. Scofield
Source: 1934 Appalachian Gas Measurement Short Course
Year Published: 1934
Abstract: First, it is recommended that all orifice meter installation conform to specification as outlined by the Gas Measurement committee of the Natural Gas Department, of the American Gas Association. Some companies, in constructing town border line industrial measuring stations where main line pressures range from 175# to 350# use three regulators for reducing the main line pressure to the desired pressure required on intermediate pressure lines. The pressure usually ranges from 2# to 30#. Other companies use only two regulators for reducing the pressure the same amount. However, where only two regulators are used and the main line pressure is as high as previously mentioned, the regulators freeze during periods of low temperature and heater installations are necessary on the line on the high side of the regulator station.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.