Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: MICROMF,TER Measurement Of Orifice Meter Tubes
Author: Kenneth E. Embry
Source: 1991 International School of Hydrocarbon Measurement
Year Published: 1991
Abstract: The most widely accepted device for the measurement of natural gas and other fluids is the orifice meter. The primary element of the orifice meter is the orifice plate and orifice meter tube consisting of the orifice fitting, or flanges, adjacent piping, and flow conditioner or straightening vanes. The properly designed meter tube should follow the guidelines for manufacture as established by the American Gas Association (AGA) Report No. 3 or American National Standard/American Petroleum Institute (ANSI/API) Report No. 2530, herein referred to as AGA //3. This paper will address the tolerances, design, and meter tube inspection according to the guidelines of AGA /3.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.