Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Control Of Distribution System Pressures And Load Distribution
Author: Joe L. Mitchell
Source: 1975 Gulf Coast Measurement Short Course (Now called ASGMT)
Year Published: 1975
Abstract: A gas distribution system will operate only as good as the equipment used and the knowledge of the men that operate it. What is a good practice in one location may not be acceptable in another. While gas distribution systems differ from one another, the basic principles are the same. Once these principles are understood and applied to a particular system the results should be good. In order to regulate distribution system pressures, one of the following types of regulators may be used: lever and weight, spring loaded, or pilot loaded. The older type was the lever and weight type, many of which are still in use today, One of the disadvantages of this type is that the lever guides are exposed to the elements and need to be covered in some manner.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.