Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Operation And Problems Associated With Prover Detector Switches Ct 4100
Author: William R. Young Jr.
Source: 2000 International School of Hydrocarbon Measurement
Year Published: 2000
Abstract: A meter prover is used to calibrate meters to establish a meter factor. The volume that passes through the meter is compared to a known volume between detector switch that is displaced either by a sphere or a piston from the time that the first detector switch is activated until the second detector switch is activated. This volume between the detector switches is determined by a calibration procedure known as the Water Draw method. The detector switches are a very important part of establishing a meter factor.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.