Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: A Large Capacity, High Accuracy Oil Flow Test Facility
Author: Charles L. Britton
Source: 1986 International Symposium on Fluid Flow Measurement
Year Published: 1986
Abstract: This paper describes a new oil flow test facility that has been recently constructed and put into operation at CEESI (Colorado Engineering Experiment Station, Inc.)* The facility presently uses a mineral oil with a kinematic viscosity of approximately 5 centistokes as the calibration fluid and can measure volumetric flowrates from 0.1 to 284 cubic-meters/hour (0,5 to 1250 GPM). It is possible to change the tluid if a different viscosity is required. The oil flow test facility was designed and constructed by CEESI under a contract with the American Petroleum Institute (API) Orifice Project Management Committee. This facility was used in the development of a data base for flange-tap orifice meters at low KeynoIds numbers.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.