Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Low Pressure Regulators
Author: H. V. Beck
Source: 1944 Southwestern Gas Measurement Short Course (Now called ISHM)
Year Published: 1944
Abstract: Low pre.ssure regulators are available in a wide variety of sizes and designs. This wide range of manufacture permits the best possible answer to be given to each particular problem of delivering gas in the most satisfactory manner. In the design of these regulators, considerable attention has been paid to the selection of the proper material for each particular part of every type of regulator. The valve seat discs are furnished in leather or of various composition materials. The composition materials are recommended lor valve seat discs for natural gas service, while leather is widely used for manufactured gas. The diaphragms are fabricated from sheepskin or flexible composition material. Sheepskin impregnated with an oil dressing is recommended for most low-pressure service. All of the castings are made of alloyed grey iron, which is unexcelled for uniformity, high tensile strength, and general superiority.

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.