Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Numerical Simulation Of Multiphase Flow In A Vertically Mounted Venturi Flow Meter
Author: A. Fiebach E. Schmeyer S. Knotek S. Schmelter
Source: Flomeko 2016
Year Published: 2016
Abstract: The objective of the European research project Multiphase flow metrology in Oil and Gas production (MultiFlowMet) is to explain and reduce the uncertainty in multiphase flow metering. A comparison of measurements using multiphase metering systems with corresponding results from computational fluid dynamics is used to achieve this goal. In this contribution, a two-phase flow through a vertically mounted Venturi flow meter is presented. According to the experimental set-up within the project, the simulations focus on the flow of oil and gas in large pipes of diameter D 0 . 104 m . The simulations represent the whole configuration including a 154 D long inflow section, where the flow pattern is formed. After a horizontal bend the flow is turned upwards through a blind-T in the vertically mounted measurement unit. This leads to swirl and turbulence and thus another pattern is observed in the Venturi flow meter. The simulation results are compared with experimental data obtained in the projec

In order to prevent spam and automated file downloads for documents within the Measurement Library, please follow the instructions below and then you will be able to email a reference to this article.