Email Document Reference

Enter your email address below and the reference for this document will be sent to shortly from webmaster@ceesi.com.

Title: Measurement Accuracy And Sources Of Error In Tank Gauging
Author: C. Stewart Ash
Source: 2008 International School of Hydrocarbon Measurement
Year Published: 2008
Abstract: Tank gauging is the means used to determine the quantity of oil contained in a storage tank. How the volume is to be used often determines the degree of desired accuracy. If the volume is to be used to quantify a custody transfer movement and money will change hands based on the result, a high degree of accuracy is required but if the volume is to be used only as an operational tool (i.e., is the tank nearly full or nearly empty), a high degree of accuracy is usually not required. If the volume is to be used for inventory control and/or stock accounting, the desired accuracy would be less than for custody transfer but greater than for normal operations. The volume contained in a tank can be determined either by manually gauging the tank or by using an automatic gauging system installed on the tank. Hand gauging of tanks has normally been considered a very accurate method to determine the quantity of oil transferred into or out of a tank. In the United States, most automatic gauging systems have been considered to be less accurate than hand gauging, but there are automatic tank gauging systems available that meet the requirements for custody transfer.


Email Address:




Copyright © 2018